IG3000SS/Sol Suspended solids/sludge concentration analyzer sensor is based on infrared scattering light technology, that is, the infrared light emitted by the light source will scatter when passing through the tested sample in the transmission process, and the intensity of the scattering light is proportional to the suspended solids concentration. The suspension/sludge concentration sensor is set to receive scattered light in the 90° and 140° directions By analyzing the intensity of the scattered light, the suspended matter concentration value is obtained.
Technical Parameter
Sensor:
Measurementprinciple: 860nm wavelength, 90° and 140° scattered light
Repeatability: ±1%
Resolution: 0.001mg/L
Calibration method: single point sample, slope calibration
Sensor voltage: 9~36VDC
Storage temperature: -10 to 50 ° C
Self-cleaning: automatic cleaning device is optional
Cable length: 10 m cable is standard and can be extended
Weight: 0.75 kg
Controller:
Display: high contrast LCD large screen, with strong backlight can operate under direct sunlight, menu navigation
Controller material: ABS17/16-L3(body), PC17/16-L3 (protective cover)Number of sensor channels: 4 channels
Output: 2-way 4-20mA (expandable)
Relay: 2 channels relay, program to set response parameters and response values
Digital communication: Optional MODBUS RS485 communication function, real-time transmission of measured values
Data storage: password type data storage and curve display function, monitoring parameter log type change dynamic
Storage temperature: -20 ℃ to 60℃
Operating temperature: -15~60℃
Protection level: IP66
Power supply: AC power supply: 90-240VAC (50/60Hz) Dc power supply: 24VDC
Dimensions: 188mm*160mm*106mm (length * width * height)
Weight: 1.45 KG
Market / Application
● Municipal sewage ● industrial wastewater ● Environmental monitoring
● Drinking and surface water monitoring ● Industrial processes
Characteristic of instrument
◆Built-in temperature sensor, automatictemperature compensation
◆Double beam infrared andscattering light photometer detection technology
◆ Digital sensor, RS-485 output, support standard ModbusRTU protocol, no
Affected by transmission distance, better stability
◆ The sensor is made of stainless steel for longer service life andreduced maintenance and downtime
◆ Using 880nm near-infrared LED light source, can compensate the samplecolor
◆Self-cleaning system, stable operation,small maintenance
◆ Not affected by flow rate, can withstandviolent impact